Neon Sign Installation

When you buy a neon sign from NeonParty®, You will receive one of the following installation kits:

1. Screw Fixing   2.Hanging with Chain
3.Steel Wire Hanging 4.What's in the box

When you place an order you will also receive a free remote-controlled dimmer, Single colour dimmer remote (left picture)or RGB colour changing dimmer remote (right picture), We configure the corresponding dimmer according to your order options.

single colour dimmer RGB dimmer
Single colour dimmer remote: RGB colour dimmer remote:

 If you'd like more information on how to install your neon sign, please refer to the below manual:

Overview Assembly:Overview and Assembly

 Screw Fixing:screw fixing neon signs
1. LED neon sign
2. Mounting holes
3. Acrylic backboard
4. Power cord
5. Dimmer
6. Power adapter
7. Installation accessories
(wire hanging, screw fixing,
or chain hanging)
8. Remote (single colour
or RGB colour changing)		 Instructions:
1. Once you have decided where you are going to hang your sign, grab a pencil and make a small mark on the wall through the centre of each hole. 2. Drill 2.5cm holes where you have marked the wall. Then, put a wall plug in each hole. 3. Put each screw into the largest opening of an advertising screw then drill these into the holes in the wall. The holes in the acrylic backing should be lined up with the advertising screws behind the sign. 4. Place a jelly washer on top of each advertising screw. Then, tightly screw the head of each advertising screw into the openings behind the sign.

Chain Hanging:chain hanging

Wire Hanging:wire hanging neon signs
Instructions:
1. Attach the hooks of the chain to the holes in the acrylic backing of your sign.
Depending on the size of your sign, you can choose to use either one or both chains.
2. Attach the hooks at the other end of the chain to your chosen hardware. We recommend hanging the chain
to the screws provided. However, how you display your sign is completely up to you! 		Instructions:
1. Attach the hooks of the chain to the holes in the acrylic backing of your sign.
Depending on the size of your sign, you can choose to use either one or both chains.
2. Attach the hooks at the other end of the chain to your chosen hardware. We recommend hanging the chain
to the screws provided. However, how you display your sign is completely up to you!

➦New-6 Ways to Seamlessly Install Neon Lights